CX ROP 1.3.1

Name of App
CX ROP (CX Series Memory Camera Recorder Remote Operation Panel)

Description
CX ROP is a sophisticated control application designed for the wireless remote operation of the Panasonic CX series memory camera recorders. The app features a user-friendly graphical interface that consolidates vital status information, camera settings, and user switch statuses on a single display. This intuitive design allows users to adjust camera settings effortlessly through touchscreen interactions. Key functionalities, such as user-defined buttons and the REC Start/Stop button, are conveniently accessible via the app. CX ROP supports manipulation of one memory camera recorder at a time, while allowing for effortless switching among up to eight devices. For further assistance on utilizing the app, users can tap the "?" button for hints.

Note
A separate purchase of a wireless module is necessary for establishing a wireless LAN connection with the camera.

Applicable Models

• AG-CX350 series (AG-CX350 / CX350P / CX350PJ / CX350EJ / CX350ED / CX350EN / CX350AN / CX350PX, AJ-UPX360MC, AG-CX200MC)
• AG-CX4000 series (AJ-CX4000G, AJ-UPX900MC)

Supported OS
iOS 12 or later

Features

1. Camera Status Display
   • Camera information overview
   • ND/CC Filter settings
   • Zoom/Focus control
   • Knee adjustments
   • TCG (Time Code Generator)
   • Remaining recording media time
2. Controllable Functions
   • Shutter control (Off/Fix/SS)
   • Gain adjustment
   • White Balance settings (PRE/A/B, AWB, ABB)
   • Master Pedestal configuration
   • Iris control (Auto/Manual)
   • Painting Gain (Red/Blue)
   • Painting Black (Red/Green/Blue)
   • User Switches (1-9) for AG-CX350 series; (1-5) for AJ-CX4000 series
   • Menu display and configuration
   • Help functionality
   • Lock feature (disables operation on CX ROP)
   • Switching between CAM/BARS output images
   • Zoom control (i.Zoom/i.Zoom Off) for AG-CX350 series only
   • Focus control (Auto/Manual) for AG-CX350 series only
   • Knee settings (Auto/Manual/Off)
   • TCG display and configuration (TC/UB)
   • Record check capabilities
   • Record Start/Stop function
   • Record metadata settings
3. Settings and Switching of Connected Cameras
   Users can configure or switch connected cameras through a connection settings panel by interacting with the connect manipulation button on the screen. For detailed instructions, refer to the "CONNECTION" section accessed via the "?" button.
4. Automatic Connected Camera Search Function
   The application employs an Easy IP protocol that automatically detects cameras within the same network. This feature is particularly beneficial when the [Easy IP] setting is configured to [20 MIN.] or [UNLIMITED] on the camera.

Notes:

• Please be aware that with iOS 14, permissions are required for local network communication. To enable permissions, navigate to [Settings]-[Privacy]-[Local Network] and activate the [CX ROP] switch.
• It has been observed that camera information may not always display accurately on the app screen in iOS devices. To rectify this issue, toggle Airplane mode as follows:
• 1. Close "CX ROP".
  2. Select "Settings" from the device home screen.
  3. Activate "Airplane mode".
  4. Deactivate "Airplane mode".
  5. Launch "CX ROP" again.
• *Please note that these steps need to be repeated after restarting or turning off the device.